sales@sasguv.com+ 91 9911998328 | + 91 9711133047 |        

+91 991 199 8328

Customer care Number

ISO Certification

SASG UV Solutions
Safety Parameters for LED UV & Water Cooled Interdeck system
Our Products

SCREW CHILLER

Home / Air/Water Cooled Chiller / SCREW CHILLER

Product Enquiry

SCREW-CHILLER

SILENT FEATURE

  • Temperature range (+40 to -40°c)
  • Wide range 30 TR to 1000 TR
  • Advance microprocessor control panels.
  • Environment -friendly R-134a refrigerant
  • Electronic expansion valve for precise capacity control.
  • Step less capacity control (25 to 100%)
  • Air cooled / Water Cooled type
  • The capacity of crew chiller varies exactly as per the fluctuating load condition.
  • Data logging, Remote operator and controlling.
  • Synchronizing with the centralized system to have easy to operation.
  • Refrigerant R134A/ R-22/R407C/R404A.
  • Helical Screw Design for   part load performance
  • Small unit size factory wired , easy lifting , easy standup logic.
  • Stainless steel Brazed PHE with option of shell & tube type evaporator designed for High surface area.
  • Flow switch is used to detect flow loss for safety of evaporator when return water flow is low.
  • Shell & tube type water cooled condenser for Indian ambient condition with externally finned copper tube
  • Only four moving part when compared to reciprocating compressor.
  • Latest Heat transfer technology result in increased Heat exchanger efficiency.
  • Step-less capacity control as per load.
  • Anti freze protection for safe operation at low temprature.
  • Use of multiple proportional Integral Derivative (PID) Temperature control loopensure consistent reliability stability and efficient operation.
  • Full screen display a simplifed view of chiller
  • Control on no of ON/OFF cycle of compressor
  • Controls and maintain stable and reliable operation of the chiller through use of extensive array of sensors, actuators , relays switches .
  • User friendly screen for users
  • Sight glass indicates the status of dry or moisture system.
  • Pressure switches protets the compressor against low & high pressure
  • Removable cartridge type filter dryers to ensure moisture free system.
Back to Top
Manufactures of Fully Automatic, Semi-Automatic, Manual Roller Coater .UV ,IR & Hot Air Conveyor for Offset machine, Screen Printing machines & All kind of 3D Object Coating attachment & Interdeck for Offset Printing machine. Semi-Automatic Screen Printing Machine for Flat and Round Object, Screen Exposure & All Kind of Related Accessories.
We are One of the largest manufacturers of Process Chillers, Gas Liquefaction Chillers, Medical Equipment Chillers, Dual Temperature Chillers, Milk & Beverage Chillers, Cascade Low Temperature Chillers
Dear All Customers,
Below are the safety Parameters for UV LED, Water Cooled UV system & regular maintenance:
  1. Use the R.O/distilled Water/Good quality water and change in a month. (If Water Quality is poor/city water change each week)
  2. We strongly recommended distilled water+ Anti frozen N with 70:30 Ratio.
  3. The pressure of water circulation should be about 20 PSI to 40 PSI (1.2 bar to 2.5 bar)
  4. The Temperature of chilled water should not be less than 200C (In any condition) without confirmation of SASG.
  5. If any case antifrozen N (Mono ethylene Glycol) is not available. We have a facility Rs. 270 per Litre (GST & Courier Charges extra as actual) , Minimum order qty will be 50 Litre.
  6. No warranty inclusive if any chip/diode/uv lamps is burned/ damaged due to poor water quality / physical damage/dirty working environment(should not deposit the dust in huge quantity at panel or LED module)
  7. If have any operation alarm on HMI concern with team SASG and don’t try to run it without resolving the same.
  8. If have any power fluctuation in this condition don’t run the LED without recommendation of team SASG.
  9. Clean the QRC in 15 days for smooth water flow

PRODUCT ENQUIRY

event